Copyright: © 2001-2002 Jaroslav Bucek


Introducing Wiagra Video Effector

Thank you very much for choose our software Wiagra Video Effector.

Wiagra Video Effector is a shareware program that could join a lot of video clips using over 120 transitions and add special effects to videos. There are over 50 video and graphic effects in this version. Every effect could be apply to whole or selected region and a lot of effects are dynamically, so it could calculate its amount.


How to buy Wiagra Video Effector

Thank you very much for your interest in register procedure.

You may select one of two ways to register program.

1. Register Wiagra Video Effector directly from its register page:

On this page you are able to select the Internet connection as Secure or Normal.

Secure is a https Internet protokol connection, that use better security connection that normal http protokol, but sometimes you can have a difficult access with secure connection, so this is the time to use normal connection.

Last, what you need to choose is kind of your payment method. You may choose one of five methods below.

2. Register Wiagra Video Effector from our web page:

Open your internet browser and direct it to www.wiagra.com. On main page select order menu to redirect to order page and follow instructions. You may click on www.wiagra.com button on main menu to direct to our page too:


Supported file's formats

Project file:

WVE - Wiagra Video Effector Project

Input formats:

AVI - Windows Audio Video Interleaved

FLI - Autodesk FLIC/FLIC-Pro, 8bit

FLC - Autodesk FLIC/FLIC-Pro, 8bit

GIF - Graphics Interchange Format

GIFF - Graphics Interchange Format

HAV - High quality Audio Video

MPG - Moving Pictures Expert Group, MPEG-1/2

MPEG - Moving Pictures Expert Group, MPEG-1/2

MPE - Moving Pictures Expert Group, MPEG-1/2

M1V - Moving Pictures Expert Group, MPEG-1/2

M2V - Moving Pictures Expert Group, MPEG-1/2

BMP - Windows Device Independent Bitmap, 8/15/24bit

JPG - Joint Photographic Expert Group, JFIF 1.02

DIB - Windows Device Independent Bitmap, 8/15/24bit

RLE - Windows Device Independent Bitmap, 8/15/24bit

JPE - Joint Photographic Expert Group, JFIF 1.02

BAY - Bayer Image

GIF - Graphics Interchange Format, (read only)

GIFF - Graphics Interchange Format, (read only)

JIF - Joint Photographic Expert Group, JFIF 1.02

JFIF - Joint Photographic Expert Group, JFIF 1.02

JPEG - Joint Photographic Expert Group, JFIF 1.02

J - Joint Photographic Expert Group, JFIF 1.02

PCX - Zsoft Paintbrush, 8/24bit

PNG - Portable Network Graphics

PNM - Portable Image, 8/15/24bit

PPM - Portable Image, 8/15/24bit

PGM - Portable Image, 8/15/24bit

RAS - Sun Raster Image, 8/24/32bit

SUN - Sun Raster Image, 8/24/32bit

RGB - Silicon Graphics Image, 8/24/32bit

RGBA - Silicon Graphics Image, 8/24/32bit

BW - Silicon Graphics Image, 8/24/32bit

SGI - Silicon Graphics Image, 8/24/32bit

TGA - Truevision Targa, 8/15/24/32bit

TIF - Tagged Image File Format

TIFF - Tagged Image File Format

XPM - X-Pixmap

Video output formats:

AVI - Windows Audio Video Interleaved

MPEG - Moving Pictures Expert Group

FLIC/FLIC-Pro - Autodesk

HAV - High quality Audio Video

BMP/DIB - Windows Device Independent Bitmap

JPEG - Joint Photographic Expert Group

PCX - Zsoft Paintbrush

PNG - Portable Network Graphics

TGA - Truevision Targa

RGB - Silicon Graphics Image

RAS - Sun Raster Image

PPM - Portable Image

TIFF - Tagged Image File Format

XPM - X-Pixmap

Audio output formats:

AVI - Windows Audio Video Interleaved

MPEG - Moving Pictures Expert Group

HAV - High quality Audio Video

WAV - Windows Wave Sound

MP2 - MPEG Audio Layer II

OGG - Ogg Vorbis Audio

Quick save actual frame as static image:

BMP - Windows Device Independent Bitmap, 8/15/24bit

JPG - Joint Photographic Expert Group, JFIF 1.02


Work with Wiagra Video Effector

After Wiagra Video Effector starts, you can see a main interface.

Here you may add some video (from your hard disk) by click on Add... button. Added video clips are displayed in Input files list, between Begin of project and End of project marks. You may see four preview images, from any video in this list.

Select one of following:

User interface

Insert video to Wiagra Video Effector project

Effects:

•	Effects list

•	Add effect

•	Watermark effect

•	Dynamic and regional effects


Effects

Wiagra Video Effector was mainly created to add dynamic, regional and watermark effects to any project or video clip. Currently you may find over 50 video effects to add - see effects list.


Effects list

Possible effects are:

 Watermark

Size

 Resize

 Resample

 Crop

Rotate

 90° counter clockwise

 90° clockwise

 180°

 Smooth rotate

Mirror

 Vertical

 Horizontal

Flip

 Vertical

 Horizontal

2D effects

 Circle around

 Fish eye

 Wave

 Triangles

 Emboss

Color correction

 Gray scale

 Gamma correction

 Brightness

 Contrast

 WhiteBalance

 Solarize

 Posterize

 Split light

 Saturation

Negative

 Negative

 Invert

Anti-aliasing

 Anti-alias

Edge

 Find edges

 Edge enhance

Sharp

 Sharpen

 Soften

Blur

 Gaussian blur

 Split blur

Noise

 Color noise

 Mono noise

 Spray

 Mosaic

Squeeze

 Horizontal

 Top

 Bottom

 Diamond

 Waste

 Round

 Double round

Split

 Round

 Waste

Ripple

 Tooth

 Triangle

 Random

Texturize

 Tile

 Overlap


Add effect

You may add effect separately to project as easy as to any selected video clip.

Why add effects separately to project and video clips?

It's better to add some effects to project (e.g. Watermark), because any transition will not hide their functionality. But when you need to add an effect, that will end with transition, you should add it only to one selected video clip (e.g. to fix a video clip brittleness you could add a brightness effect to selected clip, so it will end with ending transition and apply only to its owner clip)

How to add effects?

•	To add effect to project you have to click on [image] button in main menu or click on Add button above of project effects list on effects page

•	To add effect to selected video clip you have to select some inserted video file (no transition) and click on Add button above of selected clip effects list on effects page

•	From the pop up effects menu choose one of offered effect.

•


Watermark effect

One of the most important effect in the Wiagra Video Effector is a Watermark effect.

Watermark effect could has one of following state:

•	Picture - when you select a picture watermark type, you will have to select a graphic file, that will be represent a watermark.

•	Static text - you may type any text to set it as a static text watermark in menu [image] and confirm it by Enter

•	Dynamic text - you may choose a dynamic text watermark, that will be inserted to video, when you need to see a time and/or frame number in output video. Select it's kind in pop up menu:

When you choose text kind watermark, you can change its font by click on Font button.

Any watermark could be transparent, when you choose its transparent color. In case, you selected text watermark kind, you can choose a font color below transparent color:

If you need to make a floating watermark, you can select a frame on video time line, where it should change its position and click on Save position button. To delete position click on Delete position button.

You may select position movement, when is there saved more than one position, by right click between two saved positions in positions list:

Movement to select are floating and jumping:

•	Floating movement - calculate watermark position for every frame between prior and next saved position.

•	Jumping movement - change the watermark position only on its next saved position frame.


Dynamic effects

Any effect, that has its amount setting is a dynamic effect. It mean, that Wiagra Video Effector could calculate its amount.

Example:

When you select new effect - Smooth rotate in effects menu:

You can select its amount by click on Amount setting button in effect setting window main menu:

Now, after unmark End = Start checkbox you may set starting and ending values to enable dynamic effect (Wiagra Video Effector will calculate its amounts from it's In point to its Out point and from Start values to End values):

Outside color is the color of out-of-region area. This setting will effect in output file.

When you need to see preview without any effect or just apply all until prior effect, you may choose another value in Apply effects to preview combo box. This setting has no effect for clip or effect properties same as Selected area border color, that will only change the color of selected area, when you choose one of region above.


Regional effects

Any effect (except Watermark) is full regional. It mean, that you may select region, where the effect will be apply to. That region could be one of these kind:

•	Whole region - no region is selected and effect will be apply to whole frame

•	Rectangle - region will be apply to rectangular area, that is set down on video preview

•	Round rectangle - same as rectangle, but with rounded corners

•	Ellipse - region will be apply to elliptic area

•	Polygon - region will be apply to polygon, that must be set down on video preview. You may add new points as long as you need and when you need to close the region, you have to click on first inserted point. When region is closed, you may insert new and delete old breaks by right click on any point and choose the action from pop up menu:

Most of regional effects are dynamic too. So, it may calculate its amount automatically.


User interface

Wiagra Video Effector's user interface  is as user friendly as it was possible to create.

You may find windows listed below in Wiagra Video Effector:

•	Main window

•	Main menu

•	Clips

•	Effects

•	Output

•	Output process window

•	Support

•	Register

•	Project time line

•	Effects windows

•	Regional effects window

•	Watermark window

Note: if you need help for any control on the screen, take mouse over this control and press Alt + F1 short cut


Main window

This is screen shot of Wiagra Video Effector workspace with selected Clips  page and describtion for all visible active controls.


Main menu

You may use main menu to control a lot of functions in the Wiagra Video Effector.

First four buttons are buttons to handle project files. You may create new project, open existing and save created and/or modifying.

Next three buttons are important to add new videos to project and remove selected from project. With properties button you may display selected clip properties information window.

Add project effect button is a short cut button to project effects menu, where you may add new effects to current project.

Save frame button saves an actual frame from selected clip, with apply all inserted project and clip effects. There will not be www.wiagra.com watermark added in not registered version to output file here.

Transitions button lets you select any transition kind from animated previews in transition window.

www.wiagra.com runs and redirect your internet browser to Wiagra Video Effector home page.

With last two buttons you can minimize and close application.


New project

New button will create new, empty Wiagra Video Effector project.

If there is an opened project already, it will close it first. In case it is not saved yet, it will prompt you to save it first.


Open project

Open... button will show standard open dialog to open an existing Wiagra Video Effector project.

Click on drop down arrow to show pop up menu below:

Under Open project... item, that has the same effect as main Open... button are recently project files names, to quick open without open dialog. There are presented up to five recently projects.

As you may want to delete recently files, you may clear this list by click on Clear recently projects menu item.


Save project

Save & Save as... buttons will save currently opened Wiagra Video Effector project to hard disk.

If you saved currently opened project already and now you want to rename it, you should use Save as... button, that will show standard save dialog to save an existing Wiagra Video Effector project.


Add clip(s)

Add... button will show standard open dialog to open and add an existing Wiagra Video Effector project, any supported video or graphic file(s) to currently project.

Click on drop down arrow to show pop up menu below:

Any button in this menu will show standard open dialog to open an existing file(s) with files filter:

•	Any supported... you can find and open any supported files

•	Project... only Wiagra Video Effector project files (*.wve)

•	Video... any supported video files (*.avi, *.mpeg, etc.)

•	Graphic... any supported graphic files (*.bmp, *.jpeg, etc.)

Under Graphic... item are recently supported files names, to quick open without open dialog. There are presented up to ten recently supported files.

As you may want to delete recently files, you may clear this list by click on Clear recently projects menu item.


Remove clip(s)

Remove button will remove selected clip or transition from currently project. If there is a transition selected, it will set transition to None.

Click on drop down arrow to show pop up menu below:

Selected file item has the same effect as main Remove button.

All files item will remove all clips and transitions from the project.


Clip properties

Properties button show selected clip properties info window:

These informations are original clip video and audio properties, that could be important e.g. when you need detect if Wiagra Video Effector support audio compression in selected clip, etc.


Add project effect

Add project effect... button show supported effects menu to add an effect to currently project.

See also: watermark, dynamic effects, regional effects


Save frame

Save frame... button will show standard save dialog to save actual frame from project as a static image file. There will be apply all effects and transitions to output image file.

You may select output format from frame save supported formats


Transitions

Transitions... button lets you select any transition kind from animated previews in transition window.

Just drag and drop any animated preview from transition window over input files list to set new kind of any transition in. You have to drop it over existing transition in input files list to change this transition.


Wiagra home page button

www.wiagra.com button will open your installed Internet browser and redirect it to Wiagra Video Effector home page.


Help

Use help button to display Wiagra Video Effector help contain.

Note: if you need help for any control on the screen, take mouse over this control and press Alt + F1 short cut


Drop down arrow

Drop down arrow is displayed right of its owner button.

When a button has its drop down arrow, it could show more options with functions related to this button.


Main window pages

There are five pages in main window of Wiagra Video Effector.

Possible pages are:

•	Clips

•	Effects

•	Output

•	Support

•	Register


Clips page

Description of controls in the clips page is here.

Clips page is first page in Wiagra Video Effector, so functions from this page should be used before another pages functions.

In clips page you should manage input files ordering, setting - such as clip's In point, Out point, audio volume, transition kind and time length.


Input files

There are listed all inserted clips and transitions from current project in input files list.

Possible actions:

•	left mouse button click on

•	begin of project or end of project marks - sets actual project position to begin (end) of project

•	any other object - sets actual project position to begin of clicked object

•	right mouse button click on

•	empty area - pops up a menu to add new clip(s)

•	static image - show the clip time length window

•	transition - pops up a menu to select transition kind

UP and DOWN buttons moves any clip in project in its direction.


Transition kind

You may select any kind of transition to set transition between two neighbours clips by right click on transition in input files list.

When there is no transition between clips presented, you will see None transition text. To set some transition you have to select transition kind in main transition menu (above) and then select transition, you want to use.

To remove any transition you have to click on left mouse button over transition in input files list and then

•	click on right mouse button over transition and select None from main transition menu

or

•	click on Remove button

•


Selected clip preview

Selected clip preview area is sets to preview of original clip (whole, without any transitions and video effects), that's actually selected in Input files list.

You should set In point, Out point and Cut clips using input clip preview. You should use clip time line to move in selected clip, otherwise there will be transition apply with project time line.

Selected clip preview is located right of Input files list - see Main window preview


In/Out point selector

With In and Out point selector as well as with In/Out menu you may set input and output points for selected clip.

In output file will selected clip start with In point and end with out point - Wiagra Video Effector will ignore all frames before in point and all frames after out point in output file creation process.

In/Out selection has no effect when static image or transition is selected.


Clip time line

Clip time line is a time line track bar. Use it to move through selected clip from its begin to end ignore In and Out points and transitions by drag and drop its slider.

Sections:

White are sections before in point and after out point, that will be ignored in output process.

Neighbours sections represents neighbours clip's transitions.

Middle section is original clip, that will not be affected by any transition.

In the middle of clip time line is an clip's name caption.

Saved clip label is its original file name and transition label is its name plus time length.


Clip setting controls

Clip setting controls sets selected clip output properties.

Save in point and Save out point - sets first and last frame in selected clip. see In/Out point selector help.

Volume - select output volume amount of selected clip. You have to save this setting by click on [image] button. Click on [image] button to get changes back.

Cut... - cuts selected clip before or after actual frame and sets None transition between new created clips.


Transition setting controls

Transition setting controls sets selected transition output properties.

Length - sets time length of selected transition. You have to save this setting by click on [image] button. Click on [image] button to get changes back.

Audio during transition - output audio setting during selected transition

•	Mix previous and next - mix audio from prior and next clip

•	Half and half - audio from previous clip will stop in the middle of transition and immediately starts audio from next clip

•	Only from previous clip - only prior clip audio will be presented during transition

•	Only from next clip - only next clip audio will be presented during transition

•	Fade out - audio from prior clip will be fade out during this transition

•	Fade in - audio from next clip will be fade in during this transition


Effects page

In effects page you should maintain all effects added to your project or clips.


Before effects preview

Before effects preview is an area to preview of project's clips with transitions, but without any effect, so you may compare clips before effects with after effects.


After effects preview

After effects preview is an area to preview of project's clips with after apply transitions and every active project effects and clip effects.

You may compare clips before effects with after effects.


Quick project time line

Quick project time line is a small track bar. Use it to move through whole project from its begin to end.

It's just a copy of project time line assigned to quickly moving in project.


Project effects

There are all project effects presented in this list.

Click Add menu item to show effects menu.

Remove menu item let's you delete one - selected - or all effects from project list

Modify as well as effect item double click will show modify effect window. There are two modify effect windows:

•	watermark

•	regional and dynamic effects

Save in point, Save out point, Reset in/out and Only actual frame items sets selected effect validity as its captions describe it.

UP and DOWN buttons moves any effect in the list in its direction. This option is very important, because effects will be apply to project in sequence as it is presented in project effects list.

Click here to see how to add effect only to one selected clip.

See also Why add effects separately to project and clips?


Selected clip effects

There are all selected clip effects presented in this list.

Click Add menu item to show effects menu.

Remove menu item let's you delete one - selected - or all effects from project list

Modify as well as effect item double click will show modify effect window. There are two modify effect windows:

•	watermark

•	regional and dynamic effects

Save in point, Save out point, Reset in/out and Only actual frame items sets selected effect validity as its captions describe it.

UP and DOWN buttons moves any effect in the list in its direction. This option is very important, because effects will be apply to selected clip in sequence as it is presented in selected clip effects list.

Click here to see how to add effect to project.

See also Why add effects separately to project and clips?


Effects menu

Effects menu lets you select a new effect to your project or selected clip. When you click on Add... button above project effects list or above selected clip list or Add project effect button in main menu, you can select one of effect offered in effects menu:

All effect's menu items (except Watermark) are separated to sub menus, that should describe its functionality.

For example in Rotate sub menu you can find effects:

•	90° counter clockwise - rotates frame(s) 90 degrees counter clockwise

•	90° clockwise - rotates frame(s) 90 degrees clockwise

•	180° - rotates frame(s) 180 degrees

•	Smooth rotate - rotates frame(s) from 0 to 360 degrees.  Every effect is full regional so you can rotate whole frames or just its selected area.

Smooth rotate is dynamic effect too, so it could calculate its amount dynamically. e.g. It's amount may starts at 45 degrees and ends at 323 degrees.

See also: supported effects list


Output page


Create output

Create output... button will show output process window same as Create output... button on Output page.

Before creating output there must be added some file(s) to project and output file's properties must be filled in output page.


Output files

Output files lets you select kind of output file(s). You may create output video and audio together (one file) or separately.

Possible options are:

•	Video and audio one same file - one output video will be created from all input clips. Theirs audio will be inserted to this video too.

•	Video and audio separate files - two output files - audio and video - will be created from all input clips.

•	Video only - one output video will be created from all input clips. Theirs audio will be ignored.

•	Audio only - one output audio will be created from all input clips.

•	Batch Convert - there will be created as many files in output as count of input clips. That means, that input files are NOT joined into one file. See batch convert file's names for more info about output file's names setting.


Batch convert file's names

In case you select Batch Convert in Output files setting you may set output files names as described below:

•	use * (appendix symbol) instead file name to use original file names (except file extension of course)

•	use # (hash symbol) in file name to add number of just converted clip

•	use 0 (zero) in file name to add number of just converted frame number in case, output file is static image (bmp, jpg, etc.)

You may combine symbols above as you need.

Examples:

EXAMPLE 1

output file name: c:\my_converted_videos\OutputVideo.avi

original file names	output file names
c:\MyHolidays\Holiday2003.avi	c:\my_converted_videos\OutputVideo1.avi
c:\MyFamily\Baby.avi	c:\my_converted_videos\OutputVideo2.avi
c:\MyWork\Office.mpeg	c:\my_converted_videos\OutputVideo3.avi

EXAMPLE 2 (use asterix)

output file name: c:\my_converted_videos\*.avi

original file names	output file names
c:\MyHolidays\Holiday2003.avi	c:\my_converted_videos\Holiday2003.avi
c:\MyFamily\Baby.avi	c:\my_converted_videos\Baby.avi
c:\MyWork\Office.mpeg	c:\my_converted_videos\Office.avi

EXAMPLE 3 (use hash)

output file name: c:\my_converted_videos\OutputVideo###.avi

original file names	output file names
c:\MyHolidays\Holiday2003.avi	c:\my_converted_videos\OutputVideo001.avi
c:\MyFamily\Baby.avi	c:\my_converted_videos\OutputVideo002.avi
c:\MyWork\Office.mpeg	c:\my_converted_videos\OutputVideo003.avi

EXAMPLE 4 (use hash and zero)

output file name: c:\my_converted_videos\OutputImages###_000.bmp

original file names	output file names
c:\MyHolidays\Holiday2003.avi	c:\my_converted_videos\OutputImages001_000.bmp ... c:\my_converted_videos\OutputImages001_XXX.bmp
c:\MyFamily\Baby.avi	c:\my_converted_videos\OutputImages002_000.bmp ... c:\my_converted_videos\OutputImages002_XXX.bmp
c:\MyWork\Office.mpeg	c:\my_converted_videos\OutputImages003_000.bmp ... c:\my_converted_videos\OutputImages003_XXX.bmp
where XXX is number of frame in input clip

EXAMPLE 5 (use asterix and zero)

output file name: c:\my_converted_videos\*_000.bmp

original file names	output file names
c:\MyHolidays\Holiday2003.avi	c:\my_converted_videos\Holiday2003_000.bmp ... c:\my_converted_videos\Holiday2003_XXX.bmp
c:\MyFamily\Baby.avi	c:\my_converted_videos\Baby_000.bmp ... c:\my_converted_videos\Baby_XXX.bmp
c:\MyWork\Office.mpeg	c:\my_converted_videos\Office_000.bmp ... c:\my_converted_videos\Office_XXX.bmp
where XXX is number of frame in input clip


Video setting

Video setting is not visible, when Audio only is selected. Here you should set any output video property.

•	Output file name - type any file name here, that you want to use as an output file. See Batch convert file's names for info about generating output file's names automatically.

•	Format - select one of offered supported output video file's formats

•	Format options... - enabled only if you can set some parameters for select format. Displays the codec selection dialog for a given file format, if it has one. That way you can select the codec and other corresponding values (data rate, key frame rate, etc.) (e.g. AVI format could be set to DivX codec here, etc.).

•	Frame rate (fps) - lets you select another frame rate (fps - frames per second) than inserted clip(s) has. The frame rate of the output file, in frames per second. AVI defaults to 15 fps, movie standard is 24, TV standards are 25/50 (PAL) and 29.97/59.94 fps (NTSC). MPEG supports only these values: 22.98, 24, 25, 29.97, 30, 50, 59.94 and 60 fps, any other value will be rounded to the nearest supported. All these (standard) values are offered through Select button. For that reason use the predefined frame rate constants when the output is MPEG. If not specified the default frame rate is 30.

•	Keep original duration - tells how the input files will be converted if the output frame rate is different than input frame rate. When this is not checked the number of input and output frames will be equal, but the duration and speed will change as the output frame rate changes. When this is checked the duration and speed are equal, but the number of frames will change as the frame rate changes. Set it to checked when doing conversion between movie/TV standards (e.g. PAL to NTSC) otherwise you will see things speeded up or in slow motion.

•	Resolution - width and height of output video in pixels. Standard values are offered through Select button.


Audio setting

Audio setting is not visible, when Video only is selected. Here you should set any output audio property.

•	Output file name - type any file name here, that you want to use as an output file

•	Format - select one of offered supported output audio file's formats

•	Format options... - enabled only if you can set some parameters for select format (e.g. set OGG quality here)

•	Standard audio formats... - select one of predefined options:

•	Automatic - program determine the best quality from all input files and sets it as a current output quality

•	CD quality - sets Sample rate to 44100 Hz, Channels to Stereo and Resolution to 16 bits

•	Radio quality - sets Sample rate to 22050 Hz, Channels to Stereo and Resolution to 16 bits

•	Telephone quality - sets Sample rate to 8000 Hz, Channels to Mono and Resolution to 8 bits

•	Manual setting - you will be able to set any (Sample rate, Channels and Resolution) output quality parameter manually

Other values are enabled only when Manual setting is selected in standard audio formats...

•	Sample rate (Hz) - sampling frequency of the audio data. Standard values are offered through Select button

•	Channels - output file could be either mono or stereo

•	Resolution - resolution is a number of bits per sample per channel. This is either 8 or 16


Codec selection dialog

In codec selection dialog - standard codec dialog - you can select the codec and other corresponding values (data rate, key frame rate, etc.) of output.

You may see capture of the screen, when AVI format was selected. Selecting any Compressor, showed in the compressor list will set selected compress codec to your output.


Output setting

Some additional options could be set in output setting.

Play the following sound file, after processing is over:

Because output creating process could take a few minutes (hours), you may set some audio (wav) file, that will play to alert you, when creating process ends.

Ask before overwriting file - is needed if you want to be alerted, when output file you want to create already exists.


Output process window

Output process window is used to watch all needed output informations and to start, pause and stop output process.

Possible buttons are:

•	Start process - starts output process - creating output file(s)

•	Pause / Continue process - if you need pause process for any reason, you may pause it and then continue in process anytime you want

•	Cancel process - stops and cancel output process creation. !!! You cannot continue in process after cancel it !!!

Other informations on output process window:

•	Graphic and audio progress - possitions of the current output process.

•	Current project time - time of the output file, that is actually processed

•	Total project time - total time of the output file - you may see it on project time line too

•	Process time - tells you, how long it take from start processing

•	Remaining time (estimate) - really estimate time to the end of processing

•	Output process log - log messages - you may control some output process states here


Support page

Support page lets you visit Wiagra Video Effector supported pages without using external browser.

This could be important, if you need find some help, that is not presented in this help file yet.

e.g. Support page helps you in case you have older version of this help and you need quickly find some help information about Wiagra Video Effector that is not listed in this help file.


Register page

See how to register to register page describtion.


Project time line

Project time line is a time line track bar. Use it to move through whole project (all inserted clips and transitions) from its begin to end.

Sections:

White are sections of non-selected, but presented clips or transitions

Green (lime) section represents actual selected clip range

In the middle of project time line is a project's name caption.


How to use and set transition plug-ins

When you install new transition plug-in and the installation is finished you may find new menu item in Plug-Ins main menu of Wiagra Video Effector. In this case the installation was correct.

You may start use the plug-in, if the installation is correctly finished. Just open transition menu and select VFXPlug, where all transition plug-ins are available.

Last, you have to click on Configure button to show the configure window of the plug-in.


Insert video to Wiagra Video Effector project

You may insert any supported video file to Wiagra Video Effector project.